ANSI SCTE 16-2018 pdf download.Test Procedure for Hum Modulation 1.2. Scope The purpose of this test procedure is to define and measure hum modulation in active and passive broadband RF […]

ANSI SCTE 15-2016 pdf download.Specification for Trunk, Feeder and Distribution Coaxial Cable 1.2. Scope This specification applies to material, electrical and mechanical properties of seventy-five ohm coaxial cables as defined […]

ANSI SCTE 14-2016 pdf download.Test Method for Hex Crimp Tool Verification/Calibration 1.2. Scope To determine and verify the actual crimp dimension of hex crimp tools. Provide a calibration technique for […]

ANSI SCTE 136-2-2019 pdf download.Cable Modem TDM Emulation Interface Standard 5.1 Background Throughout the evolution of communication networks the T1 and E1 service that is delivered to the customer has […]

ANSI SCTE 09-2016 pdf download.Test Method for Cold Bend 1. Scope The purpose of this procedure is to provide instructions on testing the cold bend properties of flexible outdoor polyvinyl […]

ANSI CSA NGV2-2000 pdf download.BASIC REQUIREMENTS FOR COMPRESSED NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS 4.1.4 Periodic InService Inspections. Any requirements for periodic requalification by inspection or testing during the service […]

ANSI B7.1-2000 pdf download.Safety Requirements for the Use, Care and Protection of Abrasive Wheels 1 .1 Scope This safety standard sets forth requirements for the safe use, care and protection […]

ANSI EIA 364-90-2000 pdf download.Crosstalk Ratio Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnect Systems 4.1.1.2.2 Fixture crosstalk contributes to the specimen crosstalk. The fixture includes minimum loss […]

ANSI EIA 364-87B-2017 pdf download.Nanosecond Event Detection Test Procedure for Electrical Connectors, Contacts and Sockets 3.1.1.1.3.2 RF input impedance A Time Domain Reflectometer (TDR) or Network Analyzer Time Domain Reflectometer […]

ANSI EIA 364-32C-2000 pdf download.Thermal Shock (Temperature Cycling) Test Procedure for Electrical Connectors and Sockets 1.1 Scope This test is conducted for the purpose of determining the resistance of a […]